Jual KEN1611016K Kennedy 16 0mm 2FL L-Series Carbide Slot Drill
Deskripsi Produk : Jual KEN1611016K Kennedy 16 0mm 2FL L-Series Carbide Slot Drill
Sakha.co.id adalah distributor KEN1611016K Kennedy 16 0mm 2FL L-Series Carbide Slot Drill di Indonesia. Kennedy sendiri merupakan perusahaan multinasional yang focus pada bisnis Cutting Tools. Distributor KEN1611016K Kennedy, Distributor KEN1611016K Kennedy, Agen KEN1611016K Kennedy, Agen KEN1611016K Kennedy, Agen KEN1611016K Kennedy, Supplier KEN1611016K Kennedy, Supplier KEN1611016K Kennedy, Supplier KEN1611016K Kennedy
Spesifikasi :
| Cutter Diameter | : 16mm |
| Flute Length | : 65mm |
| Overall Length | : 150mm |
| Shank Diameter | : 16mm |
| Cutting Direction | : Right Hand |
| Finish/Coating | : Uncoated |
| Cutter Diameter Tolerance | : h10 |
| Helix Angle | : 30° |
| Material | : Carbide |
| Shank Type | : Plain Round |
| Shank Diameter Tolerance | : h6 |
| Plunge Type | : Centre Cutting |
| Standards Met | : USCTI |
| Number of Flutes | : 2 |
| Flute Type | : Helical |
Baca Juga : KEN1611012K Kennedy 12 0mm 2FL L-Series Carbide Slot Drill, Onebiz.id
Long Series – 2 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.
Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.
Seri Panjang – 2 Seruling – Metrik
Untuk kinerja optimal dan penghapusan swarf maksimum saat terjun, slotting dan routing dalam paduan ringan, kuningan, aluminium, non ferrous dan bahan lunak lainnya. Diproduksi dengan Standar USCTi.
Toleransi Metrik
Diameter: Lebih dari 1,00 ~ hingga 6,00. Toleransi: +0.000, -0.050.
Diameter: Lebih dari 6.00 ~ hingga 25.00. Toleransi: +0.000, -0.080.
Long Series – 2 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.
Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.
Seri Panjang – 2 Seruling – Metrik
Untuk kinerja optimal dan penghapusan swarf maksimum saat terjun, slotting dan routing dalam paduan ringan, kuningan, aluminium, non ferrous dan bahan lunak lainnya. Diproduksi dengan Standar USCTi.
Toleransi Metrik
Diameter: Lebih dari 1,00 ~ hingga 6,00. Toleransi: +0.000, -0.050.
Diameter: Lebih dari 6.00 ~ hingga 25.00. Toleransi: +0.000, -0.080.
Reviews
There are no reviews yet.