Jual KBE2702880K Kobe Blue Line Xsb613k Belt Sander Kit
Deskripsi Produk : Jual KBE2702880K Kobe Blue Line Xsb613k Belt Sander Kit
Sakha.co.id adalah distributor KBE2702880K Kobe Blue Line Xsb613k Belt Sander Kit di Indonesia. Kobe Blue Line sendiri merupakan perusahaan multinasional yang focus pada bisnis Power Tools. Distributor KBE2702880K Kobe, Distributor KBE2702880K Kobe, Agen KBE2702880K Kobe, Agen KBE2702880K Kobe, Agen KBE2702880K Kobe, Supplier KBE2702880K Kobe, Supplier KBE2702880K Kobe, Supplier KBE2702880K Kobe
MBS025-Xk – Mini Belt Sander Kit Suitable for shaping, paint removal, weld sanding, smoothing and rust removal on flat or curved surfaces. Supplied with 9 flexible abrasive belts and 5 contact arms. Rated for continuous use. Uses 6, 10, 13 and 20mm wide by 457mm long abrasive belts. Adjustable multi-positional sanding arm angle with a speed regulator and rear handle exhaust with noise baffler. Free speed: 18,000rpm. Air inlet thread: 1/4″ NPT. Minimum air hose size (ID): 10mm (3/8″). Air consumption: 4cfm* (113ltr/min). Air pressure: 90psi/6.3bar. Motor power: 0.6hp. Noise Level: 84dBA Sound Power; 92dBA Vibration: 0.8m/s Overall length: 390mm. *Based on a 15 second cycle per minute average use. Kit contents: Contact arms: 6, 10, 13, 20mm with flat roller. 10mm with rounded roller. Surface preparation file belts: 20mm: P80 grit (coarse), 13mm: P300 grit (fine) Aluminium oxide file belts: 20mm: P60, P80 grit, 13mm: P80, P120 grit, 10mm: P120, P150 grit, 6mm: P150 grit. 4mm hexagon key L-wrench.
Spesifikasi :
Belt Length | : 457mm |
Maximum No Load Speed | : 18,000rpm |
Horsepower | : 0.6hp |
Weight | : 1.36kg |
Air Pressure | : 90PSI |
Air Inlet Size | : 1/4 in NPT |
Belt Width | : 13mm |
Air Consumption | : 4CFM |
Baca Juga : YRK2043342K York 13x457mm Aluminium Oxide Power File Belts P80 – Pack Of 10. Onebiz.id
MBS025-Xk – Mini Belt Sander Kit
Suitable for shaping, paint removal, weld sanding, smoothing and rust removal on flat or curved surfaces. Supplied with 9 flexible abrasive belts and 5 contact arms. Rated for continuous use. Uses 6, 10, 13 and 20mm wide by 457mm long abrasive belts. Adjustable multi-positional sanding arm angle with a speed regulator and rear handle exhaust with noise baffler.
Free speed: 18,000rpm.
Air inlet thread: 1/4″ NPT.
Minimum air hose size (ID): 10mm (3/8″).
Air consumption: 4cfm* (113ltr/min).
Air pressure: 90psi/6.3bar.
Motor power: 0.6hp.
Noise Level: 84dBA
Sound Power; 92dBA
Vibration: 0.8m/s
Overall length: 390mm.
*Based on a 15 second cycle per minute average use.
Kit contents:
Contact arms: 6, 10, 13, 20mm with flat roller. 10mm with rounded roller.
Surface preparation file belts: 20mm: P80 grit (coarse), 13mm: P300 grit (fine)
Aluminium oxide file belts: 20mm: P60, P80 grit, 13mm: P80, P120 grit, 10mm: P120, P150 grit, 6mm: P150 grit. 4mm hexagon key L-wrench.
MBS025-Xk – Mini Belt Sander Kit
Cocok untuk membentuk, menghilangkan cat, mengamplas las, menghaluskan dan menghilangkan karat pada permukaan datar atau melengkung. Dilengkapi dengan 9 sabuk abrasif fleksibel dan 5 lengan kontak. Dinilai untuk penggunaan terus menerus. Menggunakan sabuk abrasif dengan lebar 6, 10, 13 dan 20 mm dengan panjang 457 mm. Sudut lengan pengamplasan multi-posisi yang dapat disesuaikan dengan pengatur kecepatan dan knalpot pegangan belakang dengan peredam bising.
Kecepatan bebas: 18.000 rpm.
Benang saluran masuk udara: 1/4″ NPT.
Ukuran selang udara minimum (ID): 10mm (3/8″).
Konsumsi udara: 4cfm* (113ltr/mnt).
Tekanan udara: 90psi/6.3bar.
Tenaga motor: 0.6hp.
Tingkat Kebisingan: 84dBA
Kekuatan Suara; 92dBA
Getaran: 0.8m/s
Panjang keseluruhan: 390mm.
*Berdasarkan penggunaan rata-rata siklus 15 detik per menit.
Isi paket:
Lengan kontak: 6, 10, 13, 20mm dengan roller datar. 10mm dengan rol bulat.
Sabuk file persiapan permukaan: 20mm: P80 grit (kasar), 13mm: P300 grit (halus)
Sabuk kikir aluminium oksida: 20mm: P60, P80 grit, 13mm: P80, P120 grit, 10mm: P120, P150 grit, 6mm: P150 grit. Kunci L-kunci segi enam 4mm.
Reviews
There are no reviews yet.