Jual KEN5034270K Kennedy 7/8-1.1/16 Inch (22-27mm) SIZE 4 NUT SPLITTER
Deskripsi Produk : Jual KEN5034270K Kennedy 7/8-1.1/16 Inch (22-27mm) SIZE 4 NUT SPLITTER
Sakha.co.id adalah distributor KEN5034270K Kennedy 7/8-1.1/16 Inch (22-27mm) SIZE 4 NUT SPLITTER di Indonesia. Kennedy sendiri merupakan perusahaan multinasional yang focus pada bisnis Hand Tools. Distributor KEN5034270K Kennedy, Distributor KEN5034270K Kennedy, Agen KEN5034270K Kennedy, Agen KEN5034270K Kennedy, Agen KEN5034270K Kennedy, Supplier KEN5034270K Kennedy, Supplier KEN5034270K Kennedy, Supplier KEN5034270K Kennedy
Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts
Spesifikasi :
| Overall Length | : 175mm |
| Product Number | : NS27 |
| Pressure Application | : Mechanical |
| Maximum Nut Capacity | : 27mm |
| Minimum Nut Capacity | : 22mm |
| Nut Capacity | : 22 to 27mm |
| Material | : Steel |
| Type | : Nut Splitter |
Baca Juga : KEN5037540K Kennedy 64mm ULTILITY PANEL BEATING DOLLY, Onebiz.id
A split nut is a nut that is split lengthwise into two pieces (opposed halves) so that its female thread may be opened and closed over the male thread of a bolt or leadscrew.[1] This allows the nut, when open, to move along the screw without the screw turning (or, vice versa, to allow the screw to pass through the nut without turning). Then, when the nut is closed, it resumes the normal movement of a nut on a screw (in which axial travel is linked to rotational travel)
A split nut assembly is often used in positioning systems, for example in the leadscrew of a lathe. It is one of the machine elements that makes single-point threading practical on manual (non-CNC) lathes. The very earliest screw-cutting lathes (in the late 18th and early 19th centuries) did not have them, but within a few decades, split nuts were common on lathes.
The two halves of the nut have chamfered ends (60° to axis), which helps the threads to find engagement during the closing action. Usually the screw and nut are also oiled for lubrication. Such provisions prolong the service life of the threads by minimizing wear.
Mur split adalah mur yang dibelah memanjang menjadi dua bagian (berlawanan dua bagian) sehingga ulir betinanya dapat dibuka dan ditutup di atas ulir jantan dari baut atau leadscrew.[1] Hal ini memungkinkan mur, saat terbuka, bergerak sepanjang sekrup tanpa memutar sekrup (atau, sebaliknya, membiarkan sekrup melewati mur tanpa berputar). Kemudian, ketika mur ditutup, mur melanjutkan gerakan normal mur pada sekrup (di mana perjalanan aksial terkait dengan perjalanan rotasi)
Rakitan mur split sering digunakan dalam sistem penentuan posisi, misalnya pada sekrup timah mesin bubut. Ini adalah salah satu elemen mesin yang membuat threading satu titik praktis pada mesin bubut manual (non-CNC). Mesin bubut pemotong ulir paling awal (pada akhir abad ke-18 dan awal abad ke-19) tidak memilikinya, tetapi dalam beberapa dekade, mur yang terbelah menjadi hal yang umum pada mesin bubut.
Kedua bagian mur memiliki ujung yang dilubangi (60 ° terhadap sumbu), yang membantu benang menemukan ikatan selama aksi penutupan. Biasanya sekrup dan mur juga diminyaki untuk pelumasan. Ketentuan tersebut memperpanjang masa pakai ulir dengan meminimalkan keausan.
Reviews
There are no reviews yet.