Jual SWT1631008A SwissTech 8 00mm Series 10 HSS-Co 8% 4 Flute Weldon Shank Long Series End Mills – Uncoated
Deskripsi Produk : Jual SWT1631008A SwissTech 8 00mm Series 10 HSS-Co 8% 4 Flute Weldon Shank Long Series End Mills – Uncoated
Sakha.co.id adalah distributor SWT1631008A SwissTech 8 00mm Series 10 HSS-Co 8% 4 Flute Weldon Shank Long Series End Mills – Uncoated di Indonesia. SwissTech sendiri merupakan perusahaan multinasional yang focus pada bisnis Cutting Tools. Distributor SWT1631008A SwissTech, Distributor SWT1631008A SwissTech, Agen SWT1631008A SwissTech, Agen SWT1631008A SwissTech, Agen SWT1631008A SwissTech, Supplier SWT1631008A SwissTech, Supplier SWT1631008A SwissTech, Supplier SWT1631008A SwissTech
Series 10 – Long SeriesDimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.Shank cutting diameter:3-6mm to +0.04 -0.0.8-20mm to +0.05 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
Spesifikasi :
| Plunge Type | : Centre Cutting |
| Material | : Cobalt High Speed Steel |
| Series | : 10 |
| Shank Type | : Weldon Flat |
| Material Grade | : M42 |
| Cutter Diameter | : 8mm |
| Flute Length | : 38mm |
| Shank Diameter | : 10mm |
| Overall Length | : 88mm |
| Number of Flutes | : 4 |
| Standards Met | : DIN 1835B |
| DIN 844 | |
| Shank Diameter Tolerance | : h6 |
| Finish/Coating | : Uncoated |
| Flute Type | : Helical |
| Cutting Direction | : Right Hand |
Baca Juga : SWT1631006A SwissTech 6 00mm Series 10 HSS-Co 8% 4 Flute Weldon Shank Long Series End Mills – Uncoated, Onebiz.id
Series 10 – Long Series
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
Shank cutting diameter:
3-6mm to +0.04 -0.0.
8-20mm to +0.05 -0.0.
Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
Seri 10 – Seri Panjang
Dimensi untuk DIN 844. Pemotongan tengah. Batang las ke DIN 1835B.
Diameter pemotongan batang:
3-6mm hingga +0,04 -0,0.
8-20mm hingga +0,05 -0,0.
Tersedia dalam HSS-Co 8% Uncoated (untuk pemesinan produksi umum), HSS-Co 8% TiCN Coated (memperpanjang masa pakai pemotong dan meningkatkan penyelesaian permukaan material kerja) dan HSS-Co 8% TiALN Coated (membuang dan menahan panas, mengurangi gesekan permukaan ditambah dengan kekerasan permukaan yang tinggi).
Reviews
There are no reviews yet.